hammer4.1操作快捷键一
今天介绍一下hammer4.1的操作快捷键，让你的创作时间再次缩短。
Tools工具
| Shift+S | Pointer Tool | 指针选择工具 |
| Shift+G | Magnify Tool | 缩放工具 |
| Shift+C | Camera Tool | 镜头视角工具 |
| Shift+E | Entity Tool | 实体工具 |
| Shift+B | Block Tool | 固体工具 |
| Shift+A | Texture Application Tool | 材质工具 |
| Shift+T | Apply Current Texture | 应用当前材质工具 |
| Shift+D | Decal Tool | 印图工具 |
| Shift+O | Overlay Tool | 覆盖工具 |
| Shift+X | Clipping Tool | 剪切工具 |
| Shift+V | Vertex Edit Tool | 顶点工具 |
File Operations文件选项
| Ctrl+N | Create a new file. | 创建新文件 |
| Ctrl+O | Open an existing file. | 打开已有文件 |
| Ctrl+S | Save the current file. | 保存当前文件 |
| Alt+B | Export again. | 再次导出 |
| F9 | Run/Compile Map. | 编译地图 |
| Ctrl+Shift+S | Open Sound Browser. | 打开声音浏览表 |
Undo/Redo取消、重做
| Ctrl+Z | Undo. |
| Ctrl+Y | Redo. |
Clipboard/Selection剪贴板、选择项
| Ctrl+C | Copy objects to clipboard (also Ctrl+Insert). | 拷贝对象物体到剪贴板 |
| Ctrl+V | Paste objects from clipboard (also Shift+Insert). | 粘贴物体 |
| Ctrl+X | Cut objects to clipboard (also Shift+del). | 剪切物体 |
| Shift+Q or Esc | Clear current selections. | 清除当前选择 |
| PgUp | Previous selection in "hit" list. | 上一个选择物体 |
| PgDn | Next selection in "hit" list . | 下一个选择物体 |
| Alt+Enter | Open up Object Properties for the currently selected objects. | 打开当前选中物体的属性介面 |
Grid栅格
| [ | Decrease the size of the grid. | 减少栅格尺寸 |
| ] | Increase the size of the grid. | 增加栅格尺寸 |
| Shift+R | Toggle grid on/off. | 开启或关闭栅格 |
| Shift+W | Toggle snap to grid. | 启用栅格吸引 |
| P | Toggle 3D grid on and off (with mouse cursor in 3D view). | 开启或关闭三维视角栅格 |
Grouping分组
| Ctrl+G | Group selected objects. | 将已选择的物体组为一组 |
| Ctrl+U | Ungroup selected groups. | 将已选择的组拆分 |
| Ctrl+R | Create prefab with selected objects. | 将选择的物体做为预制件 |
| Ctrl+T | Tie to entity. Creates an entity with selected objects, or adds objects to an existing entity if one is also selected. | 转变为实体。将已选择物体转变为实体，或者将物体添加到一个选中的实体中。 |
| Ctrl+W | Toggle Ignore Groups mode to bypass entity and group selection. | |
| Ctrl+Shift+W | Move selected solid entities to world. | 将选中的固体实体移动到地图中 |
Carving/Hollowing剪切、挖空
| Ctrl+Shift+C | Carve selected objects. | 剪切选中物体 |
| Ctrl+H | Hollow selected objects. | 挖空选中物体 |
Viewports视窗
| Ctrl+A | Auto-size 4 views to center. | 自动显示4个视窗 |
| Shift+Z | Maximize/restore current viewport. | 最大化或者恢复当前视窗 |
| Arrow keys | Nudge the current selection in the current 2D or 3D viewport. | 在三维或者二维视图中移动选中物体 |
| Shift+Arrow keys | Clone the current selection and nudge it the current 2D or 3D viewport. | 克隆选中物体，并在三维或者二维视图中移动它 |
| F6 | Cycles to the next active viewport. | 循环下一个活动视窗 |
| Shift+F6 | Cycles to the previous active viewport. | 循环上一个活动视窗 |
2D Views二维视图
| Ctrl+I | Flip selected objects vertically. | 将选中物体横向翻转 |
| Ctrl+L | Flip selected objects horizontally. | 将选中物体竖向翻转 |
| Ctrl+B | Snap selected objects to grid (based on bounding box). | 将选中物体牵引到栅格点 |
| Ctrl+Shift+B | Snap selected objects to grid (individually). | 同上 |
| Tab | Switch view types (top/side/front). | 切换视窗类别 |
| +/- | Zoom in/out (hold Ctrl to synchronize all 2D views). | 缩放 |
| Mouse Wheel | Zoom in/out (hold Ctrl to synchronize all 2D views). | 缩放 |
| 1 to 9 | Preset zoom levels. | 缩放比例 |
| Space | Hold space and left mouse button to drag view position. | 按着空格键，使用左键可拖动视窗摆放位置 |
| Alt | Disable snap to grid while dragging with the mouse. | 禁用吸引至栅格 |
| Ctrl+E | Center 2D Views on currently selected objects. | 将选中物体在二维视窗中居中 |
| Space(Hold) | Use the Left Mouse Button to 'Drag' the 2D view around. | 同space |
3D View三维视窗
Space (holding) |
Holding the left mouse button allows you to rotate your angle of view in any direction, while the viewing point remains stationary. Holding the right mouse button will allow you to move left, right, up, and down while keeping the viewing angle constant. |
同时按着左键，可以在三维视窗中以任意角度旋转； 同时按着右键，可以上下左右的移动并保持角度不变 |
| Space+Shift | The left mouse button acts the same as above. The right mouse button allows you to move forward and backward, as well as from side to side. |
左键同上功能；同时按着右键，可以前后的移动 |
| 鼠标滚轮 | Zoom in/out. | 缩放 |
| W | Move camera forward. | 向前 |
| S | Move camera backward. | 向后 |
| A | Move camera (strafe) left. | 向左 |
| D | Move camera (strafe) right. | 向右 |
| z | Toggles 3D view "noclip" navigation mode. | 使得三维视窗转变为noclip模式 |
| P | Toggle 3D grid on and off (with mouse cursor in 3D view). | 开启或关闭三维栅格 |
| O | Display frames per second and yaw/pitch of camera (with mouse cursor in 3D view). | 在视窗中显示FPS |
| I | Display bounding boxes for all visible objects. | 显示沙盒中所有可见物体 |
| X | Display selection handles for object resizing. | 显示已选取物体操作柄，以便缩放物体 |
| 1 | Decrease far clipping plane. | 减少剪切面 |
| 2 | Increase far clipping plane. | 增加剪切面 |
| Ctrl+Shift+E | Center 3D View on selection. | 将已选取物体在三维视窗里居中。 |
0
上一篇：顶点工具的应用
下一篇：hammer4.1操作快捷键二
最新评论 共有 0 位网友发表了评论
发表评论
